cisco怎么配全局模式密码(Cisco29603560)

1.启动时,按住Mode键不放。

cisco怎么配全局模式密码(Cisco29603560)(1)

2.到出现如下提示。

Using driver version 1 for media type 1 Base ethernet MAC Address: 4c:30:2d:81:ef:80 Xmodem file system is available. The password-recovery mechanism is enabled. The system has been interrupted prior to initializing the flash filesystem. The following commands will initialize the flash filesystem, and finish loading the operating system software: flash_init boot switch:

3.在冒号后面输入flash_init,成功时会出现如下提示并返回到命令提示符界面。最重要是最下面一条。

mifs[6]: 566 files, 19 directories mifs[6]: Total bytes : 57931776 mifs[6]: Bytes used : 28429312 mifs[6]: Bytes available : 29502464 mifs[6]: mifs fsck took 21 seconds. …done Initializing Flash.

4.再在冒号后面输入del flash:config.text,键入y后成功时会出现如下提示并返回到命令提示符界面。

switch: del flash:config.textAre you sure you want to delete “flash:config.text” (y/n)?yFile “flash:config.text” deleted

5.再在冒号后面输入 del flash:vlan.dat,键入y后成功时会出现如下提示,并返回到命令提示符界面。

switch: del flash:vlan.datAre you sure you want to delete “vlan.dat” (y/n)?yFile “flash:vlan.dat” deleted

6.最后在冒号后面输入boot,启动交换机即重置成功。

,

免责声明:本文仅代表文章作者的个人观点,与本站无关。其原创性、真实性以及文中陈述文字和内容未经本站证实,对本文以及其中全部或者部分内容文字的真实性、完整性和原创性本站不作任何保证或承诺,请读者仅作参考,并自行核实相关内容。文章投诉邮箱:anhduc.ph@yahoo.com

    分享
    投诉
    首页