怎么编程一个shell脚本(10个实战及面试常用Shell脚本编写)

Shell是一个命令行解释器,它为用户提供了一个向Linux内核发送请求以便运行程序的界面系统级程序,用户可以用Shell来启动、挂起、停止甚至是编写一些程序。简单来讲,Shell是连接用户与内核的桥梁,是用户与内核交流的工具。

怎么编程一个shell脚本(10个实战及面试常用Shell脚本编写)(1)

注意事项

1)开头加解释器:#!/bin/bash

2)语法缩进,使用四个空格;多加注释说明。

3)命名建议规则:变量名大写、局部变量小写,函数名小写,名字体现出实际作用。

4)默认变量是全局的,在函数中变量local指定为局部变量,避免污染其他作用域。

5)有两个命令能帮助我调试脚本:set -e 遇到执行非0时退出脚本,set-x 打印执行过程。

6)写脚本一定先测试再到生产上。

1 获取随机字符串或数字

获取随机8位字符串:

方法1: # echo $RANdoM |md5sum |cut -c 1-8 471b94f2 方法2: # openssl rand -base64 4 vg3BEg== 方法3: # cat /proc/sys/kernel/random/uuid |cut -c 1-8 ed9e032c

获取随机8位数字:

方法1: # echo $RANDOM |cksum |cut -c 1-8 23648321 方法2: # openssl rand -base64 4 |cksum |cut -c 1-8 38571131 方法3: # date %N |cut -c 1-8 69024815

cksum:打印CRC效验和统计字节

2 定义一个颜色输出字符串函数

方法1: function echo_color() { if [ $1 == "green" ]; then echo -e "\033[32;40m$2\033[0m" elif [ $1 == "red" ]; then echo -e "\033[31;40m$2\033[0m" fi } 方法2: function echo_color() { case $1 in green) echo -e "\033[32;40m$2\033[0m" ;; red) echo -e "\033[31;40m$2\033[0m" ;; *) echo "Example: echo_color red string" esac } 使用方法:echo_color green "test"

function关键字定义一个函数,可加或不加。

3 批量创建用户

#!/bin/bash DATE=$(date %F_%T) USER_FILE=user.txt echo_color(){ if [ $1 == "green" ]; then echo -e "\033[32;40m$2\033[0m" elif [ $1 == "red" ]; then echo -e "\033[31;40m$2\033[0m" fi } # 如果用户文件存在并且大小大于0就备份 if [ -s $USER_FILE ]; then mv $USER_FILE ${USER_FILE}-${DATE}.bak echo_color green "$USER_FILE exist, rename ${USER_FILE}-${DATE}.bak" fi echo -e "User\tPassword" >> $USER_FILE echo "----------------" >> $USER_FILE for USER in user{1..10}; do if ! id $USER &>/dev/null; then PASS=$(echo $RANDOM |md5sum |cut -c 1-8) useradd $USER echo $PASS |passwd --stdin $USER &>/dev/null echo -e "$USER\t$PASS" >> $USER_FILE echo "$USER User create successful." else echo_color red "$USER User already exists!" fi done

4 检查软件包是否安装

#!/bin/bash if rpm -q sysstat &>/dev/null; then echo "sysstat is already installed." else echo "sysstat is not installed!" fi

5 检查服务状态

#!/bin/bash PORT_C=$(ss -anu |grep -c 123) PS_C=$(ps -ef |grep ntpd |grep -vc grep) if [ $PORT_C -eq 0 -o $PS_C -eq 0 ]; then echo "内容" | mail -s "主题" dst@example.com fi

6 检查主机存活状态

方法1:将错误IP放到数组里面判断是否ping失败三次

#!/bin/bash IP_LIST="192.168.18.1 192.168.1.1 192.168.18.2" for IP in $IP_LIST; do NUM=1 while [ $NUM -le 3 ]; do if ping -c 1 $IP > /dev/null; then echo "$IP Ping is successful." break else # echo "$IP Ping is failure $NUM" FAIL_COUNT[$NUM]=$IP let NUM fi done if [ ${#FAIL_COUNT[*]} -eq 3 ];then echo "${FAIL_COUNT[1]} Ping is failure!" unset FAIL_COUNT[*] fi done

方法2:将错误次数放到FAIL_COUNT变量里面判断是否ping失败三次

#!/bin/bash IP_LIST="192.168.18.1 192.168.1.1 192.168.18.2" for IP in $IP_LIST; do FAIL_COUNT=0 for ((i=1;i<=3;i )); do if ping -c 1 $IP >/dev/null; then echo "$IP Ping is successful." break else # echo "$IP Ping is failure $i" let FAIL_COUNT fi done if [ $FAIL_COUNT -eq 3 ]; then echo "$IP Ping is failure!" fi done

方法3:利用for循环将ping通就跳出循环继续,如果不跳出就会走到打印ping失败

#!/bin/bash ping_success_status() { if ping -c 1 $IP >/dev/null; then echo "$IP Ping is successful." continue fi } IP_LIST="192.168.18.1 192.168.1.1 192.168.18.2" for IP in $IP_LIST; do ping_success_status ping_success_status ping_success_status echo "$IP Ping is failure!" done

7 监控CPU、内存和硬盘利用率

1)CPU

借助vmstat工具来分析CPU统计信息。

#!/bin/bash DATE=$(date %F" "%H:%M) IP=$(ifconfig eth0 |awk -F '[ :] ' '/inet addr/{print $4}') # 只支持CentOS6 MAIL="example@mail.com" if ! which vmstat &>/dev/null; then echo "vmstat command no found, Please install procps package." exit 1 fi US=$(vmstat |awk 'NR==3{print $13}') SY=$(vmstat |awk 'NR==3{print $14}') IDLE=$(vmstat |awk 'NR==3{print $15}') WAIT=$(vmstat |awk 'NR==3{print $16}') USE=$(($US $SY)) if [ $USE -ge 50 ]; then echo " Date: $DATE Host: $IP Problem: CPU utilization $USE " | mail -s "CPU Monitor" $MAIL fi

2)内存

#!/bin/bash DATE=$(date %F" "%H:%M) IP=$(ifconfig eth0 |awk -F '[ :] ' '/inet addr/{print $4}') MAIL="example@mail.com" TOTAL=$(free -m |awk '/Mem/{print $2}') USE=$(free -m |awk '/Mem/{print $3-$6-$7}') FREE=$(($TOTAL-$USE)) # 内存小于1G发送报警邮件 if [ $FREE -lt 1024 ]; then echo " Date: $DATE Host: $IP Problem: Total=$TOTAL,Use=$USE,Free=$FREE " | mail -s "Memory Monitor" $MAIL fi

3)硬盘

#!/bin/bash DATE=$(date %F" "%H:%M) IP=$(ifconfig eth0 |awk -F '[ :] ' '/inet addr/{print $4}') MAIL="example@mail.com" TOTAL=$(fdisk -l |awk -F'[: ] ' 'BEGIN{OFS="="}/^Disk \/dev/{printf "%s=%sG,",$2,$3}') PART_USE=$(df -h |awk 'BEGIN{OFS="="}/^\/dev/{print $1,int($5),$6}') for i in $PART_USE; do PART=$(echo $i |cut -d"=" -f1) USE=$(echo $i |cut -d"=" -f2) MOUNT=$(echo $i |cut -d"=" -f3) if [ $USE -gt 80 ]; then echo " Date: $DATE Host: $IP Total: $TOTAL Problem: $PART=$USE($MOUNT) " | mail -s "Disk Monitor" $MAIL fi done

8 批量主机磁盘利用率监控

前提监控端和被监控端SSH免交互登录或者密钥登录。

写一个配置文件保存被监控主机SSH连接信息,文件内容格式:IP User Port

#!/bin/bash HOST_INFO=host.info for IP in $(awk '/^[^#]/{print $1}' $HOST_INFO); do USER=$(awk -v ip=$IP 'ip==$1{print $2}' $HOST_INFO) PORT=$(awk -v ip=$IP 'ip==$1{print $3}' $HOST_INFO) TMP_FILE=/tmp/disk.tmp ssh -p $PORT $USER@$IP 'df -h' > $TMP_FILE USE_RATE_LIST=$(awk 'BEGIN{OFS="="}/^\/dev/{print $1,int($5)}' $TMP_FILE) for USE_RATE in $USE_RATE_LIST; do PART_NAME=${USE_RATE%=*} USE_RATE=${USE_RATE#*=} if [ $USE_RATE -ge 80 ]; then echo "Warning: $PART_NAME Partition usage $USE_RATE%!" fi done done

9 检查网站可用性

1)检查URL可用性

方法1: check_url() { HTTP_CODE=$(curl -o /dev/null --connect-timeout 3 -s -w "%{http_code}" $1) if [ $HTTP_CODE -ne 200 ]; then echo "Warning: $1 Access failure!" fi } 方法2: check_url() { if ! wget -T 10 --tries=1 --spider $1 >/dev/null 2>&1; then #-T超时时间,--tries尝试1次,--spider爬虫模式 echo "Warning: $1 Access failure!" fi }

使用方法:check_url www.baidu.com

2)判断三次URL可用性

思路与上面检查主机存活状态一样。

方法1:利用循环技巧,如果成功就跳出当前循环,否则执行到最后一行 #!/bin/bash check_url() { HTTP_CODE=$(curl -o /dev/null --connect-timeout 3 -s -w "%{http_code}" $1) if [ $HTTP_CODE -eq 200 ]; then continue fi } URL_LIST="www.baidu.com www.agasgf.com" for URL in $URL_LIST; do check_url $URL check_url $URL check_url $URL echo "Warning: $URL Access failure!" done


方法2:错误次数保存到变量 #!/bin/bash URL_LIST="www.baidu.com www.agasgf.com" for URL in $URL_LIST; do FAIL_COUNT=0 for ((i=1;i<=3;i )); do HTTP_CODE=$(curl -o /dev/null --connect-timeout 3 -s -w "%{http_code}" $URL) if [ $HTTP_CODE -ne 200 ]; then let FAIL_COUNT else break fi done if [ $FAIL_COUNT -eq 3 ]; then echo "Warning: $URL Access failure!" fi done


方法3:错误次数保存到数组 #!/bin/bash URL_LIST="www.baidu.com www.agasgf.com" for URL in $URL_LIST; do NUM=1 while [ $NUM -le 3 ]; do HTTP_CODE=$(curl -o /dev/null --connect-timeout 3 -s -w "%{http_code}" $URL) if [ $HTTP_CODE -ne 200 ]; then FAIL_COUNT[$NUM]=$IP #创建数组,以$NUM下标,$IP元素 let NUM else break fi done if [ ${#FAIL_COUNT[*]} -eq 3 ]; then echo "Warning: $URL Access failure!" unset FAIL_COUNT[*] #清空数组 fi done

10 检查MySQL主从同步状态

#!/bin/bash USER=bak PASSWD=123456 IO_SQL_STATUS=$(mysql -u$USER -p$PASSWD -e 'show slave status\G' |awk -F: '/Slave_.*_Running/{gsub(": ",":");print $0}') #gsub去除冒号后面的空格 for i in $IO_SQL_STATUS; do THREAD_STATUS_NAME=${i%:*} THREAD_STATUS=${i#*:} if [ "$THREAD_STATUS" != "Yes" ]; then echo "Error: MySQL Master-Slave $THREAD_STATUS_NAME status is $THREAD_STATUS!" fi done

本章写的Shell脚本例子都比较实用,在面试题中也经常出现,希望大家参考着多动手写写,不要复制粘贴就拿来跑,这样是学不会的!

,

免责声明:本文仅代表文章作者的个人观点,与本站无关。其原创性、真实性以及文中陈述文字和内容未经本站证实,对本文以及其中全部或者部分内容文字的真实性、完整性和原创性本站不作任何保证或承诺,请读者仅作参考,并自行核实相关内容。文章投诉邮箱:anhduc.ph@yahoo.com

    分享
    投诉
    首页